Chain Link Fence Accessories Needed When Install

Three drawings shows different installation types and needed accessories.
Chain link fence accessories installation type.

Loop Cap
Size:1-5/8"×1-3/8" to 3" × 1 5/8".
The front data is above size, followed is the data of round cap at the bottom.
Material: Aluminum and low carbon steel.
Color: Black, green, silver, brown and yellow.
Application: Used to fixed rail on the column, through it in the upper and lower fixed at the top of column.

A chain link fencing loop cap on the white background.
loop cap.

Top Rail
Shape: Pipe
Material: Stainless steel pipe
Thickness: 1-3/8", 1-7/8", 2-3/8", 2-1/2".
Finish treatment: Galvanized or PVC coated.
Application: Used to fix the top lock side of chain link fence.

A sample of galvanized chain link fencing top rail on the white background.
Top rail.

Tie Wire
Material: Aluminum wire, copper wire.
Finish treatment: Galvanized , PVC coated.
Color: Silver, green, black, brown.
Size: 61/2, 9(Unit: inch).
Application: Used to fixed chain link fence mesh.

Several pieces of several pieces of
Tie wire.

Post Cap
Material: Aluminum, low carbon steel, stainless steel
Size: 13/8, 15/8, 2, 21/2, 3 4. (Unit: Inch)
Color: Silver, black, brown.
Application: Used for the top of post, to prevent rain, dirt, etc. into the column, and corrosion it.

Two metal chain link fencing post cap on the white background.
Post cap.

Rail End
Material: Stainless steel, aluminum. Surface can be galvanized , PVC coated.
Size: 13/8, 15/8
Color: Copper, silver, white
Application: At the end of post, fixed it on the rail.
Specifications can be customized according to the request.

A galvanized chain link fencing rail end on the white background.
Rail end.

Brace Band
Classification: Flat brace band, square brace band, 90 degree brace band.
Material: Low carbon steel, hot galvanized, aluminum.
Color: Silver, black, green, brown, etc.
Specification can be customized by the request.
Application: Fixed column and rail, enhance the stability of chain link fence.

A galvanized chain link fencing brace band on the white background.
Brace band.

Tension Band
Material: Galvanized steel
Size: 1.0 × 3.0 × 3.0 (Unit: Inch)
Color: Gray or silver.
Application: Used for fixed the bottom of column.

A galvanized chain link fencing tension band on the white background.
Tension band.

Carriage Bolt
Size: 5/16-18 × 1-1/4 Inch
Material: Galvanized steel
Color: Gray or sliver
Application: Used to fixed fastener or straps.

A set of galvanized chain link fencing carriage bolt on the white background.
Carriage Bolt.

Chain link fence accessories common size:

  • Hot Dip Galvanized Post Cap Dome type for 73 mm OD pipe.
  • Hot dip galvanized Post cap 114 OD.
  • Hot Dip galvanized Rail End Cap suitable 42.4 mm OD pipe.
  • Hot Dip Galvanized Corner Boulevard Clamp 73 mm × 42 mm OD size with 3/8 " nut and bolt.
  • Hot Dip galvanized End Boulevard Clamp 73 mm × 42 mm OD size with 3/8" nut and bolt.
  • Hot Dip galvanized Boulevard clamp for 114 mm × 42 mm OD size with 3/8" nut and bolts.
  • Hot Dip galvanized Corner Boulevard clamp for 114 mm × 42 mm OD size with 3/8" nut and bolts.
  • Hot Dip galvanized End Boulevard clamp for 114 mm × 42 mm OD size with 3/8" nut and bolts.
  • Saddle Clamp for 114 × 114 mm OD posts.
  • Saddle Clamp for 73 × 73 mm OD Posts.

Galvanized pvc coated chain link fencing system including all accessories.

  • Line posts 60.3 mm od galvanized/pvc coated including top rail caps.
  • Corners, intermediate straining posts 73 mm od × 2.80 m high complete with all accessories galvanized pvc coated.
  • Op rail and brace rails 42 mm od galvanized pvc coated.
  • Chain link 50 × 50 mm meshes 3.76 mm / 4.88 mm galvanized extruded wire.
  • Tension wire 3.76/4.88 mm extruded galvanized pvc coated.
  • Stirrup wires 2.5/3.55 mm extruded galvanized pvc coated.
  • Tying wire 1.4/2 mm galvanized pvc coated.

Type 1

Fence height 1800mm high Chain link complete with top rail. It needs line post at each 3 meters and straining post at all corners. Changes in directions and maximum 90°.

Product lists:

  • Fence height: 1800 mm high with top rail.
  • Post:
    • Line posts: 60.3 mm OD × 3.91 mm thickness × 2.70 m long @ 3 m centers.
    • Straining posts: 73 mm OD × 5.16 mm thickness × 2.80 m long at all corners.
  • Tension wire: 3.76/4.88 mm.
  • Stirrup wire: 2.5/3.55 mm.
  • Truss rod: 10 mm.
  • Top rail: 42 mm.
  • Line post cap.
  • Straining cap.
  • Top rail cap.
  • Clips.
  • Other accessories.

Type 2:

Barbed wire and BTC fixed on top of a high precast wall. All posts and fittings should ba galvanized or PVC coated.

  • Line V arm posts: 700 mm × 700 mm × 100 mm × 4 mm angle with three 6 mm slots on each side. The V arm is complete welded onto 60 mm outside diameter steel vertical post 200 mm long set in prepared sockets cast inside the precast panels and filled with grout at maximum 2500 mm center.
  • Intermediate straining posts: 60 mm × 60 mm × 6 mm same as above but with 6 sets of bolts and nut: 150 mm × 10 mm eyebolts and loop nuts.
  • The straining posts: they are set in prepared pockets on top of the precast panels and filled with non shrink grout at maximum 50 cm. centers.
  • Barbed wire: 1.8 mm × 2.60 mm galvanized or PVC coated double strand barbed wire with barbs at maximum 100 mm centers.
  • Galvanized Barbed Tape Concertina: 2.5 mm diameter high tensile wire with 0.005 mm flat barbs medium blades with 110 mm spirals with 5 heavy duty clips per spiral. The maximum spacing when fully stretched shall be 180 mm.
  • The BTC shall be fixed on top of the V arms and fastened to the barbed wires with 2 mm galvanized tying wire at maximum 500 mm centers

Type 3:

3 meter high chain link fencing with top rail in galvanized and PVC coated materials.
Fence height: 3000 mm.

  • Line post: 60.3 mm OD × 3.91 mm thickness
  • Straining post: 73 mm OD × 4 m × 5.16 mm. It is installed at all corners, changing in directions and maximum 90 cm centers in straight length of fencing.
  • Concrete: concrete for post foundation and reinforced concrete beam.
  • Top rail: 42 mm diameter.
  • Tension wire: 3.75/4.88 mm.
  • Stirrup wire: 2.5/3.55 mm.
  • Tie wire: 1.4/2 mm.
  • Truss rod: 10 mm diameter:
  • Line post cap.
  • Straining post cap.
  • Top rail cap.
  • Clips.
  • Other accessories.

Type 4

Gates complete with gate posts and tracks (with door lock and 114..3 mm diameter both side + all necessary materials).

  • Double gate: 3 m high × 1.8 m/2.7 m/3 m/3.1 m/3.5 m/4 m/4.5 m/5.80 m/6 m wide.
  • Other accessories.

Type 5

3 m high chain link fence plus cranked lean over arms 1.20 m, making overall height of 4.20 m including top rails.

  • Chain link fence: 3 m high + 1.2 m cranked height.
  • Line post: 73 mm outer diameter × 4 m × 3.9 mm thickness and a 1.20 m high lean over arm with 2 top rails fixed at 3 m centers.
  • Straining post: 73 mm outside diameter at all corners, including brace rail and fittings.
  • Gates between the corridors: 3 m width × 3 m high complete with gate posts and civil works. These gates will be fixed approximately 5 m from both sides of the road.
  • Double leaf gates: 6.50 m wide × 4 m high fabricated from 60 mm × 60 mm × 3 mm square hollow section with center rail and six equal spacing for fixing the 358 mesh. The gates shall be covered with galvanized pvc coated weld mesh 76 mm × 12.5 mm × 4 mm × 4 mm fixed to welded cover plates 30 mm × 5 mm with 10 mm diameter holes and another cover plate 30 mm × 5 mm and complete with 8 mm × 30 mm galvanized bolts at maximum 250 mm centers.
  • Gate post: 250 mm × 250 mm × 6 mm × 6 m.
  • Gates are extended 1 m above the gates for tie rods and 1 m below the ground in excavated holes 700 mm × 700 mm × 1000 mm deep and filled with concrete The gates to be complete with 3 no heavy duty hinges and pivotal hinges at the bottom.
  • Gate tracks: 100 mm × 6 mm radius flat plate with 10 mm welded sprays every 500 mm and shall be set in excavated trenches 300 mm × 300 mm and filled with concrete.
  • Top rail: 42 mm diameter.
  • Tension wire: 3.76/4.88 mm.
  • Stirrup wire: 2.5/3.55 mm.
  • Tie wire: 1.4/2 mm.
  • Truss rod: 10 mm diameter.
  • Gate: 3 m × 3 m.
  • Gate: 6.5 m × 4 m.
  • Top rail cap.
  • Straining post cap.
  • Other accessories.

Type 6

Chain link 2500 mm high complete with 6 barbed wires and 5 layers of BTC. Fence height 2500 mm plus V arms 6 barbed wires one layer of BTC on top and 2 layers along the bottom on both sides of the fence.

  • Line posts: 60.3 mm OD × 3.40 m long × 3.91 mm, including V arms 700 mm × 700 mm × 100 mm galvanized PVC coated angles same design as item no 2 except the vertical sleeve fits inside the line posts complete with locking nuts the posts including foundations at maximum 3000 mm centers.
  • Straining posts: 73 mm OD × 3.4 m long × 5.16 mm thickness including heavy duty V arms complete with 6 sets of 150 mm × 10 mm eyebolts and loop nuts. All galvanized PVC coated posts to be set in excavated holes at all corners.
  • Barbed wire. 6 line 1.8/2.6 mm diameter galvanized or PVC coated with bards at maximum 102 mm centers.
  • Chain link fence: 3.76/4.88 wire diameter × 50 × 50 mm meshes ××2500 mm high and 3 lines of tension wire.
  • Barbed tape concertina: 2.5 mm diameter galvanized high tensile wire with 110 spirals in 730 mm outer diameter.
  • Heavy duty clips when fully extended the spacing shall not be no more than 1800 mm centers.
  • Top rail: 42 mm.
  • Tension wire: 3.76/4.88 mm.
  • Stirrup wire: 2.5/3.55 mm.
  • Tie wire: 1.4/2 mm.
  • Gate: 3 m × 3.65 m.
  • Truss rod: 10 mm diameter.
  • V arms.
  • Top rail cap.
  • Clips.